7
> Sudden temperature differences may result in condensation forming inside the unit. In such situ-
ations allow the equipment to stand for at least one hour in a well-ventilated place to acclimatise
to the new temperature before startup!
> Do not operate the flash equipment in places where there is an explosion hazard!
> Do not use the power pack or lamps in or on water! Attention: high voltage!
> The power pack and lamps must not be immersed in water or other liquids! This could cause dan-
gerous
electric discharges!
> Before connecting a lamp to the power pack, the transport protection must be removed from the
front of the lamp!
> For safety reasons, never operate a lamp without the protecting glass in place! To protect eyes
against UV radiation, either a UV-coated protecting glass or a UV-coated lamp must be used.
> Before startup, the lamp must be mounted on a stand or suspended from a suitable mounting. When
a lamp is suspended, it must be secured to the mounting with the retaining screw
> For lamps, only sand-filled fuses of the type indicated on the safety type plate may be used! Sand-
filled fuses can be identified by their opaque body. If the wrong fuse is used, the lamp may burst.
> Filters or diffusers should not be fastened directly on to flash tubes, halogen modelling lamps, or
protecting glasses!
> Operate equipment and lamps only in the correct protective bag with ventilation slots!
> Cooling slots on the unit and lamps must never be covered.
> When laying, clearing away or rolling up cables, make sure they do not contact hot equipment or
parts of lamps, and that they do not cause a tripping hazard!
> Do not touch the lamp sockets on a power pack, and never insert a metallic object into a socket!
> Flash tubes, modelling lights, halogen lamps and protecting glasses operate at high temperatures.
This also applies to the front faces of lamps. Any accessory used on the front of a lamp also be-
comes very hot. Take great care when handling such accessories! Touching hot components can
cause injuries!
> When operating flash equipment, never touch glass or metal parts!
> Allow the unit and connected lamps to cool completely after use, before packing them!
> Remove the battery before you clean or service the unit!
> Equipment and lamps that have fallen over or been damaged must be checked by a competent
specialist before they are put back into service!
> To prevent dangerous electric shocks, never open a power pack or lamp! There may still be dan-
gerous voltages inside the unit. Units should only be opened, and all service and repair carried
out by an authorised broncolor Service station. Incorrect assembly can cause dangerous contact
voltages, even on connected units.
> For all MobiLED lamps with the serial numbers N08, N10, N12 and O04, it is compulsory that they
are modified in our Service station before use with the Move 1200 L power pack.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales